{"product_id":"red-sea-reefrun-9000-dc-pump","title":"Red Sea ReefRun 9000 — DC Return Pump 4000-9000 L\/h ReefBeat Control","description":"\u003cp\u003eThe \u003cstrong\u003eRed Sea ReefRun 9000\u003c\/strong\u003e is the most powerful of Red Sea's first-generation DC return pumps: 4,000 to 9,000 L\/h (1,000 to 2,500 gph) with a maximum head of 7.0 m (23 ft), on just 30 to 95 W. It's the pump for large REEFER systems and installations where the sump sits far below the tank.\u003c\/p\u003e\n\u003ch2\u003eImportant: the ReefRun Dual Controller is required\u003c\/h2\u003e\n\u003cp\u003eThe official Red Sea manual is clear: first-generation ReefRun pumps \u003cstrong\u003ecan only be used when connected to a \u003ca href=\"\/en\/products\/red-sea-reefrun-dual-dc-pump-control\"\u003eReefRun Dual Controller\u003c\/a\u003e\u003c\/strong\u003e, sold separately. One controller runs up to 2 devices — two ReefRun pumps, a REEFER DC Skimmer, or a combination of both — and brings them into the ReefBeat app over Wi-Fi: customized daily schedules, feed and maintenance scenarios, and automatic safety shutdown if the pump runs dry or the impeller stalls.\u003c\/p\u003e\n\u003ch2\u003eOfficial Red Sea specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlow: 4,000 to 9,000 L\/h (1,000 to 2,500 gph)\u003c\/li\u003e\n\u003cli\u003eHead: 2.6 to 7.0 m (8.5 to 23 ft)\u003c\/li\u003e\n\u003cli\u003ePower consumption: 30 to 95 W\u003c\/li\u003e\n\u003cli\u003eOutlet: 1\" GAS male\/female thread · 1⅜\" GAS threaded rings · 1⅜\" inlet grid\u003c\/li\u003e\n\u003cli\u003eSupplied fittings: hose barbs for 25\/32 mm (1\" \/ 1¼\") tubing plus connectors for 25 mm (¾\") and 32 mm (1\") rigid PVC pipe\u003c\/li\u003e\n\u003cli\u003eDesigned for fully submerged installation in the sump (fittings supplied); external installation possible with additional fittings\u003c\/li\u003e\n\u003cli\u003eRotatable outlet, adjustable inlet flow guide, extra-long cable with the connector close to the pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaintenance, per the manufacturer\u003c\/h2\u003e\n\u003cp\u003eClean regularly to remove organic and calcium carbonate deposits: pull the outlet chamber retainer ring, remove the impeller assembly, rinse and brush with a soft brush, and soak in a slightly acidic solution such as diluted vinegar if needed (remove O-rings and rubber feet first). The impeller shaft has a very strong magnet — hold it firmly and protect the ceramic bearing at the bottom of the chamber. Complete impeller (R35571), lower bearing and power supply (R33577) are available as spare parts.\u003c\/p\u003e\n\u003ch2\u003eReefRun 9000 or ReefRun G2?\u003c\/h2\u003e\n\u003cp\u003eThe 9000 is the natural choice to complete or replace a pump on a system already running a ReefRun Dual Controller. For a new installation, the \u003ca href=\"\/en\/products\/reefrun-g2-dc-pump\"\u003eReefRun G2\u003c\/a\u003e runs standalone without a Dual Controller and uses less power per litre pumped: per the manufacturer's measurements at 125 cm, the G2 8000 delivers the same real-world flow as the 9000 with 27% less electricity. We'd rather tell you before you buy.\u003c\/p\u003e\n\u003ch2\u003eOur advice\u003c\/h2\u003e\n\u003cp\u003eWe run the ReefRuns — I have one in my own REEFER 525 G3 at home. Red Sea doesn't invent pumps: they take an existing product and, with their big R\u0026amp;D team, they improve it and chase down the things that were missing. Well designed, well thought out, easy to clean, with plenty of protection and notifications if it ever goes down.\u003c\/p\u003e\n\u003ch2\u003eWhy buy from ReefSolution\u003c\/h2\u003e\n\u003cp\u003eAuthorized Red Sea dealer in Canada, with French and English support and in-store pickup in Laval. Shipping across Canada. Related products: the \u003ca href=\"\/en\/products\/red-sea-reefrun-dual-dc-pump-control\"\u003eReefRun Dual Controller\u003c\/a\u003e (required for this pump) and the \u003ca href=\"\/en\/products\/reefrun-g2-dc-pump\"\u003eReefRun G2 range\u003c\/a\u003e for a standalone installation.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the controller included with the ReefRun 9000?\u003c\/h3\u003e\n\u003cp\u003eNo. The Red Sea manual states that first-generation ReefRun pumps only work connected to a ReefRun Dual Controller, sold separately. One controller does run 2 devices — if you already have a REEFER DC Skimmer, your existing controller probably has a free port.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the ReefRun 9000 and the ReefRun G2?\u003c\/h3\u003e\n\u003cp\u003eThe G2 runs on its own with a built-in Flow Controller, while the 9000 requires the Dual Controller. At equivalent real-world flow, the G2 8000 uses 27% less electricity per the official measurements at 125 cm of head.\u003c\/p\u003e\n\u003ch3\u003eWhat spare parts exist for the ReefRun 9000?\u003c\/h3\u003e\n\u003cp\u003eRed Sea publishes the parts in the manual: impeller with ceramic shaft and O-ring (R35571), lower bearing with removal tool (R33583), outlet chamber (R35589), outlet fitting set (R35564), flow guide (R35565), controller cable (R35563) and power supply (R33577).\u003c\/p\u003e","brand":"Red Sea","offers":[{"title":"Default Title","offer_id":42714029097131,"sku":"RSR251920","price":458.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0513\/7108\/1899\/files\/ReefRun-pump-saltwateraq-29100-1-3-e1680720114460.webp?v=1704473583","url":"https:\/\/reefsolution.com\/en\/products\/red-sea-reefrun-9000-dc-pump","provider":"Aquarium ReefSolution inc.","version":"1.0","type":"link"}