Tunze Turbelle® stream2 6105

Turbelle stream 6105For aquariums from 200 to 2,000 litres (52 to 528 USgal.).Flow rate: 3,000 to 13,000 l/h (792 to 3,434 USgal./h).Energy consumption: max. 45 W.Voltage / frequency: 100 240 V / 50 60 Hz.Cable length: 5 m (196.8 in.).Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 50mm (1.96 in.).Magnet Holder up to a glass thickness of 19 mm (.74 in.). Stream 2 Eco-energetic The innovative motor based on the eco-energetic concept and newly developed pump technology ensures a very high efficiency with very low maintenance and power consumption. Very silent run Special plastic bearings, a titanium-alloy axle and silicone absorbers enable a very silent run without wear which applies for smaller models as well as for the powerful pump delivering 30,000 l/h. (7,925 USgal./h). Large suction area The water which is drawn in passes through a giant intake strainer, and thus prevents premature clogging. Magnet Holder - a standard feature As a standard feature, Turbelle stream is supplied with a magnetic holder, which enables uncomplicated attachment at any position on the aquarium pane from 19 mm (.74 in.) to 25 mm (.98 in.). Flexible adaptation The ball-type design is an intelligent solution for installation with a minimum of hydraulic losses. Contrary to other pumps, they offer a lot of flexibility with respect to positioning and orientation of the water stream, which can be adjusted in such a way that an effective flow is produced over a long distance in the aquarium at lower power consumption. Controllable output The Turbelle stream 6105, 6205 and 6305 pumps have been fitted with electronic speed controllers running on safety extra-low voltage. They are ideal for wave or tide simulation in every aquarium, and contain a new intelligent micro-processor controlled motor. Along with Multicontroller 7095, 7096 or Singlecontroller 7091 they are an unbeatable team. No problem in case of power failure Fitted with Safety Connector 6105.50, Turbelle stream 6105, 6205 and 6305 can be operated on every 10 V to 24 V direct-current source (battery, solar cell). The safety connector permits normal operation with the TUNZE power supply unit, but in case of a power failure it will automatically switch over to a direct-current source.