AF150 Media Reactor 7200 ml — Large-Volume Fluidised Filter Previous Gen - Aquaforest

Aquaforest AF150 — fluidized media reactor 7,200 ml large-volume legacy model

The AF150 Media Reactor is the largest historic fluidized reactor in Aquaforest's lineup, with a useful volume of 7,200 ml. Legacy model gradually replaced by the AF130 in the current catalog, it remains relevant for aquarists managing very large systems (past 700 L) or for those with plumbing already sized for this format.

15 cm diameter chamber, about 45 cm tall, 20 mm fittings. Clear acrylic column for watching media fluidization. Loads huge amounts of activated carbon, GFO, biopellets, or zeolite simultaneously — enough to cover several months of operation without frequent reload.

Typical AF150 use

• 700+ L reef tanks — very large volumes where the AF130 becomes tight on media capacity.
• Multi-tank setups — a single central reactor feeds several tanks in parallel.
• Frag farms — centralized filtration on several propagation tanks.
• Commercial systems — stores, pet shops, aquaculture to treat.

Current catalog status

• Legacy model — gradually replaced by the newer AF90/AF110/AF130 lineup.
• Still performing — fluidized mechanics stay identical, no functional degradation.
• Parts compatibility — current Aquaforest grids and gaskets may sometimes need adapting.
• Modern alternative — for replacement, pick AF130 or combine two AF110s for equivalent volume.

Setup

• External pump: not included — 1,500-3,000 L/h per media.
• 20 mm fittings compatible with reef plumbing.
• Stable placement: full reactor weighs over 10 kg — a solid support is mandatory.
• Fluidization: watch the first minutes to tune flow and avoid fines ejection.

Specifications

• Brand: Aquaforest (Poland)
• Useful volume: 7,200 ml
• Dimensions: about 45 cm tall × 19 cm outer diameter (15 cm chamber)
• Fittings: 20 mm
• Compatibility: reef tanks 700 L and up, multi-tank setups

Why choose Aquaforest at ReefSolution

• AF130 Media Reactor 5,000 ml — the current large-volume reference.
• Carbon 5 L — the large-format activated carbon to load in the AF150.

Frequently asked questions

Is the AF150 still manufactured by Aquaforest?

No — the AF150 is a legacy model gradually replaced by the AF130 in the current Aquaforest range. It remains available on residual distributor stocks and on the used market. New purchases usually go to the AF130.

Can I replace an AF150 with an AF130 with no modification?

The 20 mm plumbing is identical — no fitting adaptation needed. Watch the loaded media volume though: the AF130 offers 5,000 ml versus 7,200 ml on the AF150. If your tank fully uses the 7,200 ml, plan either a more frequent reload on the AF130, or two AF110 reactors in series for equivalence.

Do I need a reinforced stand for a full AF150?

Yes — loaded with 7 kg of media + water, the reactor weighs over 10 kg. A stable acrylic or metal stand is required. Don't place it on thin plywood sump shelves.