RO/DI Systems & Filters

Skip to results list

Filters

104 items

Filter

An RO/DI system produces the pure water used to mix saltwater and to top off evaporation. Here are the three AquaticLife systems compared using the manufacturer's figures, then the replacement cartridges that go with each, the pump for homes with low water pressure and the TDS meters to check the result.

Which AquaticLife RO/DI system should you choose?

Twist-In 100 GPD Classic 100 GPD RO Buddie + DI 50 GPD
Rated output (at 65 PSI and 77 °F) 100 US gal per day 100 US gal per day 50 US gal per day
Stages 4: 5-micron sediment, carbon block, RO membrane, colour-changing DI resin 4: sediment, carbon block, RO membrane, colour-changing DI resin 4: 5-micron sediment, carbon, RO membrane, colour-changing DI resin
Waste water about 3.5 to 1 of product water about 3.5 to 1 of product water about 3.5 to 1 of product water
Changing cartridges A quarter turn, no tools and no need to shut off the water 10-inch housings, wrenches included Inline cartridges
Included with the unit Faucet, under-sink and garden hose adapters, drain saddle Pressure gauge, membrane flush valve, automatic shut-off, wall bracket Faucet adapter, 20 ft of 1/4 in tubing
Dimensions 12 × 4 × 13 in 16.5 × 8.5 × 18 in with the bracket 7.2 × 4 × 13.8 in
Manufacturer warranty (cartridges and membrane excluded) 3 years 3 years 1 year

AquaticLife lists smaller aquariums among the uses for the RO Buddie. For all three, the manufacturer calls for a booster pump when household water pressure is below 40 PSI.

We also carry two 5-stage 100 GPD RO/DI systems: white cartridges and clear cartridges.

Replacement cartridges: which one fits which system?

Stage Twist-In RO Buddie When to change it according to AquaticLife
1. Sediment Twist-In sediment RO Buddie sediment every 3 to 6 months
2. Carbon Twist-In carbon RO Buddie carbon every 3 to 6 months
3. RO membrane Twist-In 100 GPD membrane 50 GPD membrane every 12 to 24 months
4. DI resin Twist-In DI Inline colour-changing DI when all the resin has changed colour

For the Classic, AquaticLife sells 10-inch cartridges; in the 10 in × 2.5 in format we carry sediment, extruded carbon and colour-changing DI resin.

Water pressure too low: the Smart Buddie pump

The Smart Buddie pump raises the pressure going into the RO system. AquaticLife lists it as compatible with 50 to 100 GPD systems, including the RO Buddie, the Classic 100 GPD and the Twist-In, and states that it increases output and reduces waste water. To find out your own pressure, the 1-150 PSI inline pressure gauge connects to 1/4 in tubing.

Checking the water you make: HM Digital TDS meters

  • DM-1: two inline probes, to compare the water going in with the water coming out. Accuracy of ± 2% according to HM Digital.
  • TRM-1: three inline measuring points. Accuracy of ± 2%.
  • Single inline monitor: one measuring point, 1/4 in T-fitting.
  • Handheld TDS meter: to test a container of water by hand.

HM Digital monitors are factory calibrated with a 342 ppm NaCl solution; the 342 ppm calibration solution is used to recalibrate them.

Frequently asked questions

Can a float valve be connected to the RO Buddie + DI?

No. AquaticLife forbids it on the RO Buddie + DI: the inline DI cartridge cannot handle the pressure. The auto shut-off float valve kit operates between 40 and 80 PSI according to AquaticLife.

Does an RO system remove chloramines?

AquaticLife states in its manuals that the Twist-In and the RO Buddie remove chlorine, but not chloramines.

How much water does an RO system waste?

About 3.5 litres of waste for 1 litre of product water, according to AquaticLife, for the three systems on this page.

Can you drink water from an RO/DI system?

AquaticLife states in the Twist-In manual not to drink water that has passed through the DI resin.

How do you know the DI resin is spent?

The resin changes colour as it is used up. AquaticLife says to replace it when all the resin has changed colour.

Shipping across Canada. Free shipping available depending on the order amount. Advice in-store in Laval.